|
|
As an extension to the in-house Quality Management System that has existed at Miyama for the past three decades, we have been ISO 9001 certified. The implementation of this system is a result of the requests from our international clients. |
|
Technical Center |
|
|
As an extension to the in-house Quality Management System that has existed at Miyama for the past three decades, we have been ISO 9001 certified. The implementation of this system is a result of the requests from our international clients. |
|
As well as complying with the standard ISO 9001 for our management system, we are endeavoring to have our product independently certified, according to either international product standards or the local specification. This is to once again ensure our customers that the Miyama product they purchase is of the best quality and exceeds their requirements. |
|
Working in conjunction with local authorities, architects, engineers and contractors over the past 35 years has involved various research and design tasks for underground utilities. In this time, all products manufactured by Miyama have been designed, tested and manufactured in our own laboratories and factories. And to this day, we still continue to test all of our products both internally and externally. |
| Product name: NOVATEC®-BC6C |
| Chemical classification: Polypropylene (C3H6)m |
|
Chemical Resistance |
||
| Chemical (Density Wt % - ℃) |
NOVATEC®-BC6C |
|
| Nitric Acid (10-RT) | ◎ | |
| Nitric Acid (10-70) | ○ | |
| Nitric Acid (30-RT) | ○ | |
| Nitric Acid (30-70) | △ | |
| Sulphuric Acid (10-RT) | ◎ | |
| Sulphuric Acid (10-70) | ◎ | |
| Sulphuric Acid (30-RT) | ◎ | |
| Sulphuric Acid (30-70) | ◎ | |
| Sodium Hydroxide (10-RT) | ◎ | |
| Sodium Hydroxide (30-RT) | ◎ | |
| Sodium Hydroxide (30-70) | ◎ | |
| Sodium Hypocholite | ◎ | |
|
Notes: |
||
| ◎=No effect | RT = Room Temperature | △=Not recommended |
| × = Not suitable | ○=Minor effect conditional usage | |
|
Physical Characteristics |
||
| Item | Unit | NOVATEC®-BC6C |
| Specific Gravity |
G/cm³ |
0,90 - 0,91 |
| Bending Elasticity |
Kgf/cm² |
15.000 |
| Tensile Yield Strength |
Kgf/cm² |
310 |
| Braking Elongation |
% |
200 |
| Izod Impact Strength |
Kgf - cm/cm² |
10 / 3,5 |
| Rockwell Hardness |
- |
100 |
| Polyolefin Competence |
- |
Conformity |
| Advantageous Characteristics |
- |
High Impact / High Gloss |
|
Safety Data |
||||||||||||
| Classification of dangerous and harmful product: Not Applicable | ||||||||||||
| Extinguishable agents: Water, Carbon Dioxide, Dry Chemical and Foam Extinguisher | ||||||||||||
|
Gas Generated due to Combustion |
||||||||||||
|
|
Air Q t/hr |
Generated gas mg/1g specimen |
||||||||||
|
|
Hcl |
Co² |
Co |
Cos |
So² |
N²o |
Nh³ |
Non |
CH4 |
C2H4 |
C²H² |
|
| Polypropylene |
100 |
- |
1125 |
190 |
- |
- |
- |
- |
- |
107 |
213 |
106 |
| Melting point: 150°C - 160°C | ||||||||||||
| Flash point / Ignition point: Approx. 340°C / >400°C | ||||||||||||
|
|
|
Load Deflection Data for type 40x40x40 |
|
|
This page is still Under Construction We apologize for the inconvenience. |
